Utility Mode; Site - VWR SAS ISO 100 Contact Bedienungsanleitung

Change the number indicated by "^^" by pressing the "UP" or "DOWN" arrows and press ENTER to go to the next
number.
Repeat until you reach the last number, confirm by pressing ENTER.

"SITE"

This option is used to memorise the name of the site in the file "DISPLAY RECORD". Site identification should be
changed for samples taken at different sites especially if the results are to be printed.
Select SITE function from UTILITY MODE programme.
Press ENTER to modify the site.
Change the figure indicated by "^" by pressing the "UP" or "DOWN" arrows and press ENTER to go to the next
figure.
16
MM/DD/YY HH:mm
08/31/06
^^
CLEAR
MM/DD/YY HH:mm
08/31/06
^^
CLEAR

UTILITY MODE

SITE
CLEAR
SITE
[ ABCDEFGH ]
^
CLEAR
11:33
ENTER
11:33
ENTER
ENTER
ENTER