Clear Record; Remote Control; Calibration - VWR SAS ISO 100 Contact Bedienungsanleitung

Press ENTER to display the following data.
Date
Record position
number
Site/Identity
You can view all completed cycles by pressing the "UP" or "DOWN" arrows. The symbol "*" is displayed near the
volume aspirated if the volume was aspirated with the multimode function.
Press CLEAR to exit this function.

"CLEAR RECORD"

This option is used to delete all the data memorised in the "DISPLAY RECORD". Before starting this procedure,
be sure that all stored data are not required or have been downloaded.
Select CLEAR RECORD function from UTILITY MODE programme.
Press ENTER to delete the data.
Press ENTER to confirm the deletion of data or press CLEAR to exit the function.

"REMOTE CONTROL"

The REMOTE CONTROL function is used to connect the SAS to an optional infrared data downloading device.

"CALIBRATION"

The "Calibration" function is a password protected menu accessible only by an authorised technician.
DISPLAY RECORD
001 08/31/06
BBCD/3345 Lt. 1250 *
CLEAR
UTILITY MODE
CLEAR RECORD
CLEAR
CLEAR RECORD
CONFIRM
CLEAR
End sampling time
11.31
Multimode indicator
Aspirated Liters
ENTER
ENTER
19