System Requirements - Sony HAR-LH500 Bedienungsanleitung

System requirements

The following hardware and software are necessary to use the "M-crew for
HAR-LH500" software.
s IBM PC/AT or compatible (This software does not run on the Apple
Macintosh.)
s CPU*:
s Video board and display driver:
s Hard disk space:
s CD-ROM drive (for software installation)
s USB port: 1 or more
s OS**:
s Media player:
s Display:
* Intel Pentium compatible CPUs must have equivalent or better performance than
noted above. (e.g., sound skipping may occur during playing of an audio file).
** When using Windows 2000, Service Pack 3 must be installed. See Microsoft's home
page for details.
Notes
• The proper operation of M-crew is not guaranteed on some computers even if they
meet the requirements above.
• The proper operation of M-crew is not guaranteed on computers that you constructed
yourself or on computers with an operating system that you upgraded yourself.
• Do not use a USB hub. If multiple USB devices are connected to the hub,
M-crew may not operate the HAR-LH500 connected to the computer properly.
Intel Pentium II 233 MHz/Celeron 300 MHz or higher
SVGA (800 × 600 pixels), 65,536 colors or more
20 MB or more (When installing M-crew and the help.)
Windows 2000 Professional/Windows Me/Windows XP Home
Edition/Windows XP Professional
(This software does not run on Microsoft Windows 3.1,
Windows NT, Windows 95 or Windows 98. When working in
a Windows 2000 or Windows XP environment, log on as the
administrator.)
Windows Media Player (Before using the "M-crew for HAR-
LH500" software, you must first install Windows Media Player
6.4 or higher in your computer.)
SVGA (800 × 600 pixels), 65,536 colors or more
GB
5