Transport; Storage; Guarantee; Possible Faults - ATIKA HB 60 Bedienungsanleitung

Benzin-heckenschere

Inhaltsverzeichnis

Verfügbare Sprachen

Transport

To transport the device stop the engine and wait until the

cutting device does not longer move. Attach the protective

cover.

Carry the device with the front handle.

When transporting the device within a car put it in the boot

or on a separate loading area. Secure the hedge trimmer

against tipping over, damages and fuel spillage.

Storage

Store unused devices with attached protective cover in a

dry, locked place out of the reach of children.

To extend the service life of the hedge trimmer and

guarantee smooth operation, before storing for a longer

period

thoroughly clean the device

treat all movable parts with an environmentally friendly

oil

Never use any grease!

Possible faults

Fault

Hedge trimmer does not work.

Hedge trimmer cuts with interruptions

Engine is running, cutting device does

not move

Cutting device gets hot

Possible cause

• No fuel supply

• Fault in the fuel line

• Fuel filter clogged

• Spark plug defective

• Carburettor defective

• Internal fault.

• ON / OFF switch defective.

• Cutting device blocked

• Internal fault.

• Clutch defective

• Missing lubrication => friction

• Not enough play

• Cutting blades are blunt

Slide the protective cover on the cutting device.

Remove the spark plug connector.

Empty the fuel tank completely.

Dispose of remaining fuel in an environmentally

compatible manner.

Operate the engine until the carburettor is empty.

Guarantee

Please observe the enclosed terms of guarantee.

Remedy

• Check the fuel quantity

• Check the fuel line for kinks or damages

• Clean/replace the fuel filter

• Replace the spark plug