Assembling The Microscope - Optika B-380 Series Bedienungsanleitung

7.7

Assembling the microscope

1. Insert the optical head above the stand and tighten
the screw with the provided allen wrench. (Fig.1)
ALC models only
2. Connect the ALC cable to the socket on the back
of the frame. (Fig. 2)
3. Insert eyepieces into the empty tubes of the opti-
cal head. (Fig. 3)
4. Screw each objective into the thread of
the nosepiece,
magnification. (Fig. 4)
clockwise with increasing
Page 15
Fig. 1
Fig. 2
Fig. 3
Fig. 4