Unpacking - Optika B-380 Series Bedienungsanleitung

6.

Unpacking

The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge
of the container and lift the top half of the container. Take some care to avoid that the opti-
cal items (objectives and eyepieces) fall out and get damaged. Using both hands (one around the
arm and one around the base), lift the microscope from the container and put it on a stable desk.
Do not touch with bare hands optical surfaces such as lenses, filters or glasses. Traces of grease or
other residuals may deteriorate the final image quality and corrode the optics surface in a short time.
7. Assembling
Once opened the microscope box, the microscope parts are the following:
7.1 B-382PL-ALC / B-382PLI-ALC
⑧
⑥
① Frame
② Objectives
③ ALC observation head
④ Eyepieces
④
②
⑤
①
⑤ Tension adjustment tool
⑥ Dust cover
⑦ Power supply
⑧ Immersion oil
Page 11
③
⑦