GYS GYSPOT INVERTER BP.LG - 220 V Bedienungsanleitung Seite 47

Repair order
Vehicle make
The arrow keys (
field. Press the
Catalogue
• The SD card management library allows you to manage your SD cards over 2 GB..
• For each repair order, a log file xxx.dat is associated (with xxx=identifier from 001 to 100). In each log, a maximum of 500 welding points can be
recorded. On consultation, the names of the repair order and the user are displayed.
• The page number is indicated at the top left..
• All repair orders are stored in the file called catalog.GYS.
• This file contains the total number of repair orders, the name of each repair order and the name of each user. There is a maximum of 100 repair
orders.
User programs
Saving the settings allows you to define a user program in order to easily find its settings for future use. 20 memory slots are available. Each of them
contains the following settings: tool, arm, welding power, welding time and pressure.
A program can be associated to the clamp or gun.
The button is used to save the current settings of the manual mode (power, time and pressure). The 20 memory slots are then indicated by their
identifier (for those used) or by a symbol» ---» for free slots..
The ID is entered using the 4 keys
stored.
The button is used to access the settings previously saved. Choosing an empty location has no effect.
Briefly pressing key deletes the selected program from the list of saved programs.
The key exits the program selection mode, switches the machine to manual mode with the parameters and tool saved in the program.
To deactivate a program, simply change the value of a parameter in one of the three modes manual, normal or multiplate or change the tool (clamp,
gun) using the button.
GYSPOT INVERTER BP.LG
User identification
Vehicle model
or ) are used to change the letters or numbers. The keys - and + are used to move the cursor inside the
button briefly to clear the field. The
The button is used to consult the repair orders. The page number is displayed (max. 13)
The keys - and + are used to change pages. The keys
job. The button displays the selected repair order.
The button key is used to exit the report view mode.
. When entering an ID that has already been used, the machine will delete the settings that were previously
button allows you to scroll through the fields for editing or reading.
et
EN
Registration (optional)
Chassis number (optional)
are used to select previous or next
47