Husqvarna TE 630 2011 I.E. Merkmale, Gebrauch, Wartung Seite 83

ADJUSTING THE IDLE
Adjust the carburettor with warm engine and with the
throttle control in closed position. Proceed as follows:
- turn the idle speed adjustment screw (1) on the throt-
tle body, located on the right-hand side of the vehicle,
until the idle speed of 1650 RPM is reached (turn
clockwise to increase the speed and anticlockwise to
reduce the speed).
1
To do this, you need to reach the adjuster screw from
airbox front end, using the supplied 8-10 wrench, and
work lengthwise with respect to the motorcycle.
EN - 25