Husqvarna TE 630 2011 I.E. Merkmale, Gebrauch, Wartung Seite 71

7- SPEED / V MAX / RPM (figure 7)
- SPEED: speed - maximum value: 299 kmh or 299
mph;
- V MAX: Shows the maximum speed reached by the
vehicle, in kmh or mph.
Maximum value: 299 kmh or 299 mph. To set to zero
V MAX, push the knob SCROLL (A) for more than 3 sec-
onds;
- RPM: engine r.p.m. shown on the vertical bar indica-
tor.
8- SPEED / TRIP 2 / RPM (figure 8)
- SPEED: speed - maximum value: 299 kmh or 299
mph;
- TRIP 2: distance- maximum value: 999.9 km/miles
(the data will be lost after detaching battery);
To set TRIP 2 to zero, push the knob SCROLL (A) for more
than 3 seconds;
- RPM: engine r.p.m. shown on the vertical bar indica-
tor.
9- TRP 2 / CLOCK / RPM (figure 9)
- TRIP 2: distance- maximum value: 999.9 km/miles
(the data will be lost after detaching battery);
To set TRIP 2 to zero, push the knob SCROLL (A) for more
than 3 seconds;
- CLOCK: Clock- reading from 0:00 to 23:59:59 (the
data will be lost after detaching battery);
To reset the clock, push the knob SCROLL (A) for more
than 3 seconds in order to increase the hours; release
the knob then, after 3 seconds, it is possible to increase
the minutes;
- RPM: engine r.p.m. shown on the vertical bar indica-
tor.
A
10- SPEED /RPM (engine r.p.m. numeri-
cal value) (figure 10)
- SPEED: speed - maximum value: 299 kmh or 299
mph;
- RPM: engine r.p.m.; both vertical bar indicator and
numerical value are on.
EN - 13