Stand-Off Guide; Drag Cutting 40 Amp; Gouging With The Powercut-1300/1600 Using The Pt-38 Torch - ESAB Powercut-1300 Bedienungsanleitung

SECTION 4
WArNINg
4.3

Stand-off guide

Refer to torch manual.
4.4

Drag Cutting 40 Amp

Refer to torch manual.
4.5 gouging with the Powercut 900 using the PT-38 torch
Refer to torch manual.
DrAg CUTTINg, EVEN WITH LOWEr CUrrENT LEVELS MAY SIgNIfI-
CANTLY rEDUCE THE LIfE Of TOrCH CONSUMABLES. ATTEMPTINg
TO DrAg CUT WITH HIgHEr CUrrENTS grEATEr THAN 40 AMPS
MAY CAUSE IMMEDIATE CATASTrOPHIC CONSUMABLE DAMAgE.
122
OPErATION