Cleaning And Care - Silvercrest SHBS 3.7 A1 Bedienungsanleitung

BB.5$ B%ERRN 6HLWH  'LHQVWDJ  'H]HPEHU    

7. Cleaning and care

DANGER! Risk of electric shock!
Unplug the power unit|9 from the wall socket before cleaning
the hair and beard trimmer|5 and the battery charger|10.
WARNING! Risk of injury!
Always switch the hair and beard trimmer|5 off before clean-
ing.
WARNING! Risk of material damage!
Do not use any astringent or abrasive cleaning agents.
NOTE: clean and oil the device after every use.
Hair and beard trimmer|5 and battery charger|10
• Wipe the casing of the hair and beard trimmer and the
battery charger with a damp cloth.
Comb attachments|2,|1
• Remove the comb attachment. Rinse the comb attachment
with water and let it dry before using it again.
Hair trimmer, beard trimmer and precision trimmer
attachments|12,|13,|4
1. Figure A: remove the attachment from the hair and beard
trimmer|5 by pressing it with the thumb towards the rear.
2. Remove the hair remnants from the attachment using the
cleaning brush|16 included in the delivery.
3. Apply a few drops of blade oil|15 to the cutting edge of
the attachment. Using a soft cloth, wipe off the surplus oil,
if necessary. Only use acid-free oil, such as e.g. sewing
machine oil.
Nose/ear hair trimmer attachment|11
• Remove the nose/ear hair trimmer attachment|11. Rinse it
with water and let it dry completely before using it again.
GB 15