Attaching The Cart Handle - Boston Scientific Lithovue System Bedienungsanleitung

Figure 3�3 – Installing the touch Pc Mounting Plate
(3) No. 10-32 x 9/16"
Mounting Screws

Attaching the cart Handle

1. Separate the two pieces of the Cart Handle by using a Phillips-head screwdriver to remove the (2)
pre-installed screws.
2. Attach the two pieces of the Cart Handle together around the Cart Post below the Cart label. The
dark part of the handle should face in the same direction as the Cart's Height Adjustment Knob.
See Figures 3�4 and 3�5.
3. Re-insert the (2) screws and use a Phillips-head screwdriver to secure the two handle pieces
firmly around the Cart Post. Be careful not to overtighten the screws.
Figure 3�4 – Attaching the cart Handle
Cart Handle
14
Black (K) ∆E ≤5.0
Touch PC
Mounting Plate
Top of Cart Post
Cart Post
10-32 x 9/16"
Phillips-head
screws
User's Manual