Installation; Intended Use; Product Specifications; Overview - VWR Ministar Bedienungsanleitung

Installation

Bench top area required for the clearance envelope for the intended use

Intended Use

For Quick Spin-down from Walls or Caps of Centrifuge Tubes
-
-Complete Set with Circular Fixed-Angle Rotor and Strip Rotor
For research use only. Not intended for any animal or human therapeutic or diagnostic
use.

Product Specifications

Dimensions
Weight
Electrical
Fuse
Speed
RCF
Acceleration time in s
Deceleration time in s
Noise level in db (A)
Power consumption in W

Overview

The VWR MiniStar Centrifuge is supplied with two rotors, one for microtubes and one for 0.2ml
PCR strip tubes. The 8 place rotor is designed to centrifuge up to eight individual 1.5/2.0ml
plastic microcentrifuge tubes. It will also accept 0.5ml and 0.4ml tubes with the adapters supplied
with the unit. Adapters are available separately for 0.2ml tubes. The strip tube rotor is designed
to centrifuge four 8 x 0.2ml strip tubes. It will also accept up to 32 individual 0.2ml tubes. Both
rotors are designed for applications requiring relatively low g-forces, such as microfiltration, cell
separation and quick spin downs from the walls of tubes.
Please read this manual thoroughly before attempting to operate the centrifuge.
13.2 x 13.2 x 11.2 cm
0.55 kg
AC 230V, 50.60Hz, 65mA
0.5A, 250V (F)
6000 rpm
2000 x g
5
1.5
56
5
VWR MiniStar Centrifuge | 2