Room Data; Language - OJ Electronics OJ-GreenZone-Module Montageanleitung

OJ Zone Module and Room Panel with 2" Touchscreen

Room data

In the Room data menu, you can see the current sensor readings.
Use this menu at least once after configuration has been com-
pleted to check and validate the installed sensors. Use the Left
and Right arrows to toggle between the multiple screens.
Tap the Left arrow a couple of times to go back to the main menu.
After validating a sensor, switch configuration mode back to
Manual. An alarm will then be triggered if the system loses contact
with a sensor (see page 21 for more information on alarms).
8 © 2015 OJ Electronics A/S
English OJ Zone Module and Room Panel with 2" Touchscreen
Settings menu
Tap the Down arrow at the bottom of the main menu.
The second page of the main menu will then appear. Tap the
Settings button to enter the settings menu.

Language

The language used on the Room Panel screen can be changed
by tapping the Language button. Note that the flag to the right
indicates the language currently selected.
The languages available are shown on multiple screens. You can
toggle between the language screens with the Left or Right arrow.
© 2015 OJ Electronics A/S
English
9