Introduction; Section Names; Volume Knob - Korg electribe2s Bedienungsanleitung

Introduction

Thank you for purchasing the Korg electribe/electribe sampler
Music Production Station.
In order to take full advantage of your new instrument, please
read this instruction manual carefully and use the product as
directed. You should also keep the instruction manual for future
reference.

1. Section names

Top panel
1
4
5
6
1. Power button
This button turns power ON or OFF.

2. Volume knob

This knob adjusts the volume output from the Line Out jack or
the Headphone jack.
3. Input Level knob
This knob adjusts the input level from the Audio In jack.
4. Display
This shows information for patterns, parts and parameter
settings.
5. Transport section
(Rec) button
This button enables recording of rhythms, phrases or knob
movements. Pressing this button during recording will stop
the recording process and playback will continue.
(Stop) button
This button will stop playback.
(Play/Pause) button
This button starts playing a pattern or pauses it.
Tap button
Pressing this button a couple of times at the desired BPM will
change the tempo to your desired selection.
22
2 3
7
10
The electribe/electribe sampler is a production station for dance
music that is capable of creating original music. Using the knobs
and the touch pad on the main unit enables you to edit sounds to
easily create rhythm and phrase patterns with a single unit.
Basic operation for the electribe sampler is the same as for the
electribe.
For additional explanations that apply to the electribe sampler,
refer to "electribe sampler features" (→ p. 16) and "Recording &
Editing Samples" (→ p. 16).
TIP Illustrations in this manual show the electribe.
8
6. Touch pad section
Touch pad
This pad is used for playing with the functionality of the gate
arpeggiator or touch scale, or for controlling the master effect.
Gate Arp button
This button turns the gate arpeggiator function ON.
Touch Scale button
This button turns the touch scale function ON.
Master Fx button
This button turns the master effect control function ON or
OFF.
MFX Hold button
This button allows you to maintain the previously set master
effect status by using the touch pad even after letting your
fingers off the touch pad, when turning the Master FX button
ON.
TIP The ON / OFF status of the MFX Hold button can be
memorized in a pattern.
7. Common section
Value knob
This knob changes the value of the parameter that's currently
shown on the display.
9
11
12
13