Safety Information - Mettler Toledo LV12 Bedienungsanleitung

1 Safety Information

Read and understand the instructions in this manual before you use the device.
•
Keep this manual for future reference.
•
Include this manual if you pass on the device to other parties.
•
If the device is not used according to the instructions in this manual or if it is modified, the safety of
the user may be impaired and Mettler-Toledo GmbH assumes no liability.
1.1 Definition of signal words and warning symbols
Safety notes are marked with signal words and warning symbols. These show safety issues and
warnings. Ignoring the safety notes may lead to personal injury, damage to the instrument,
malfunctions and false results.
WARNING
CAUTION
NOTICE
Note
1.2 Product specific safety note
The device has been tested for the experiments and intended purposes documented in the appropriate
manual. However, this does not absolve you from the responsibility of performing your own tests of
the products supplied by us regarding their suitability for the methods and purposes you intend to use
them for.
Intended use
This device is designed to be used in quality testing laboratories by qualified staff. The LV12 is
intended to be used as automatic feeder for small parts (ø max. 20 mm) such as capsules, tablets
or small electronic and mechanical components.
Any other type of use and operation beyond the limits of technical specifications without written
consent from Mettler-Toledo GmbH, is considered as not intended.
Site requirements
The device has been developed for indoor operation. Avoid the following environmental influences:
Conditions outside of the ambient conditions specified in the technical data
•
Powerful vibrations
•
Direct sunlight
•
Corrosive gas atmosphere
•
Explosive atmosphere of gases, steam, fog, dust and flammable dust
•
Powerful electric or magnetic fields
•
Automatic Feeder
for a hazardous situation with medium risk, possibly resulting in death or severe
injury if not avoided.
for a hazardous situation with low risk, resulting in minor or moderate injury if not
avoided.
for a hazardous situation with low risk, resulting in damage to the device, other
material damage, malfunctions and erroneous results, or loss of data.
(no symbol)
for useful information about the product.
General hazard Electrical shock
Safety Information​ 3