Sym CRUiSYM 300i Bedienungsanleitung Seite 10

 Turn Signal Indicator:
The left or right Indicator will be flashing according to the operated directions of turn signal light switch
when it is turned on.
 Fuel Gauge:
The pointer in this gauge shows how much fuel remains in the tank.
The pointer stays in "E" position when key switch is turned to 〝OFF〞.
When key switch is turned to "ON", and the "pointer" also in "E" position (red area). Refuel immediately
 ABS indicator
Normally the ABS (Anti-lock Brake System) indicator light goes on when the ignition switch is turned on
and goes off shortly after the scooter starts moving. If the ABS is normal, it stays off. If something is
wrong with the ABS, the indicator goes on and stays on. When the indicator light is on, the ABS does
not function but if the ABS fails, the conventional brake system will still work normally.
 Side Stand Warning Indicator
When the side stand pulls down , the warning indicator tights on and the engine cannot be started ,when
the side stand raises up ,the indicator goes out and the engine can be started.
CAUTION :
 Not to have trouble on electrical meter working, or damage the electrical meter.
 Do not wipe plastic components, such as the instrument panel, the headlight, body covers, etc. with
solvents, such as gasoline, etc. Wiping plastic components with solvents can damage these components.
 Storage box Indicator：This demonstrated the Storage box lamp opens.
 Engine coolant temperature
To indicate engine coolant temperature.
When turn the main switch to "ON", the LCD and the water temperature indicator keeps coming on.
Normally, the LCD indicator should be below the (H) position when the scooter is operating. If the LCD
indicator stays above (H) position, the water temperature indicator flashes. Please check the coolant level
of spare coolant tank and check cooling fan for proper operation.
CAUTION:
The indicator will stay above (H) position when engine is run under high temperature for a long period
of time. In this case, the only way to cool the engine is to stop the engine.
 EFi trouble warning Indicator
When turn the main switch to "ON", this warning indicator will come on and then go off after the engine is
running. It displays the condition of the EFi system is working correctly. If there is any problem on the EFi
system, the warning indicator will remain on all the time or does not come on. Please contact with a SYM
dealer to check the self-diagnosis system or electrical connections.
 Engine oil check indicator
Engine oil check indicator is for showing engine oil inspection / replacement time. When the vehicle is
ridden for approximately 1,000 kilometer, engine oil indicator illuminates which means engine oil
inspection / replacement is needed. Press "S" (Oil Reset) button to reset engine oil mileage. Engine oil
indicator goes off when the "S" button is pressed and the engine oil mileage will be recalculated from the
current riding mileage. Engine oil level should be checked every 1,000 kilometer and replaced every
5,000 kilometer.
"OIL CHANGE"
7. Use of each component
7