3·3 Adjusting The Speed Of The Speed Feed Unit; Protecion Devices; 3·5 Using The Feed Unit On Acircular-Saw Machine; 3·6 Spare Clearances Around 14 The Machine - Maggi STEFF 2032 Bedienungsanleitung

OM312
Pos. "1"
Pos. "2"
3-3 AD.JUSTINQ THE SPEED OF
THE 4-SPEED FEED UNIT
This model has only 4 speeds as it has
no gearbox.
Consequently, speed is adjusted by al-
tering the number of motor revolutions
and by inverting the two internal trans-
mission gears as previously explained.
N•
of
raYS
PO&.
1 2
.,.
3Amls
7 ml$
"2"
8mrs 15m's
3ROLLI$RS
3-4 PROTECION DEVICES
Before putting the unit into operation,
ensure that the dividing protection
(gearbox cover) has been adequately
screwed on.
3·5 USING THE FEED UNIT ON
A CIRCULAR.SAW MACHINE
A Feed unit must be so positioned on
the circular saw that the saw is imme-
diately after the input rollers (B) and (C).
3-6 SPARE CLEARANCES
1WJ
AROUND THE MACHINE
~
During the setting up and the regula-
tion of the Feeder one must allow suf-
ficient clearance space between the
Feeder and fixed surfaces such as
walls, machinery ecc. Therefore, de-
pending on the dimensions of the piece
to be processed it is necessary to in-
crease the spare clearance all around
the machine by 1/2 meter.
19