Support; 2·4 Electrical System - Maggi STEFF 2032 Bedienungsanleitung

2-3 FITTING THE FEED UNIT
ON THE SUPPORT
Once the support has been fastened
to the workstand, one only needs to
attach the Feed unit, by turning the le-
ver on the unit with collar (B) (see fig-
ure on page 16) fitted at the end of the
support.
2-4 ELECTRICAL SYSTEM
The machine comes supplied with a
completely installed electric system.
Make sure it is connected to the users
system by qualified personnel. The con-
nection wire is unprovided with the plug
for connection to the users machine.
The Feed Unit can only be connected
by means of special taps for feed units
installed on the user machine, and that
guarantee the feed unit disconnection
when the machine is disconnected.
Moreover, this makes sure that after the
111!9)
machine stopping and subsequent
ten- ~
sion resetting , the feed unit does not
restart on its own. The tap must be pro-
vided with an overload protection de-
vice and must be inserted in the pro-
tective measures for the machine
undervoltage disconnection.
The electrical diagram can be found in
chapter 5.
17