Safetyprotections; Transport- Overall Dimen- Sions; Setup Requirements - Maggi STEFF 2032 Bedienungsanleitung

1-3 SAFETY PROTECTIONS
The STEEF 2032 Feed units are
equipped with special devices which
make work safe:
1) A protection side door prevents ac-
cidental access to internal moving
parts.
2) Two semiflexible brushes prevent
the operator's hand from being ac-
cidentally inserted.
3) Accurate design of the support
avoids all danger of splitting up of
the different parts, even in case of
incorrect tightening by the operator.
Dimensions of Feed unit
1-4 TRANSPORT· OVERALL Dl·
MENSIONS
The STEEF 2032 Feed unit are packed
in two separate boxes in order to facili-
tate their transport. It is advisable to
keep the pacl<ing material for subse-
quent transport requirements.
Package Weight
Feed unit STEEF 2032 10.2 kg
Cross-shaped support
20 kg
1·5 SETUP REQUIREMENTS
III9J
We can only guarantee the problem- 1:1111
free, long-lasting functionality and pre-
cision of your machine and safe opera-
tion if the following requirements on the
setup area are fulfilled.
- The machine must stand in a dry,
enclosed room with temperatures
between
+1o•c
and
+4o•c.
- There must be sufficient room
around the machine so the opera-
tor cannot be squeezed between the
machine and a wall when
any
move-
able parts are extended.
- The power cable must be laid so the
operator cannot trip over it.
- The machine must be connected to
a stable current supply with max.
deviations of ±1 0% in the rated volt-
age.
- The machine ground wire must be
connected to the system ground
wire.
15