use cooking utensils made of heat-resistant plastic or wood. Always
remove your food, before cutting. We will not be liable for damage
to the non-stick coating, when unsuited utensils have been used.
• Before first use, and after cleaning via an automatic dishwasher, wipe
the non-stick surface with some drops of cooking oil, before heating
glutinous sauces.
• Do not use the appliance, when the non-stick coating is scratched,
cracked, or detached or brittle due to overheating.
• Do not use spray-on non-stick coatings or grill cleaner. Do not use vio-
lence.
TECHNICAL SPECIFICATIONS
Model:
Power supply:
Power consumption:
Length of power cord:
Weight:
Dimensions:
Temperature:
Capacity, fondue pot:
Certification:
These specifications may change without notice.
EN
44
42566 Fondue Set
230 V AC, 50/60 Hz; 16 A
1000 Watt
approx. 100 cm (39 1/2 inch)
approx. 3.3 kg
heating base + fondue pot: approx. 326 x 220 x 165 mm
(width x depth x height; without turn table)
turn table: approx. 400 mm in diameter (approx. 15 1/2 inch)
approx. 23-190°C (100-375°F); continuously variable
for water: max. 98°C (208°F)
approx. 1.3–2.0 litres ("MIN" to "MAX");
for oil and very high temperature: max. 1.6 litres ("1")
KNOWING YOUR NEW FONDUE SET
6
7
8
1
FORKS HOLDER: reduces splashing during operation; the fondue forks can be hooked into the grooves at the inner rim.
2
REMOVABLE, NON-STICK COATED FONDUE POT FOR UP TO 2.0 LITRES—with thermally insulated handles.
3
CONTINUOUSLY CONTROLLABLE ALUMINIUM HEATING PLATE: place the fondue pot here.
4
HEATING BASE IN A ROBUST STAINLESS STEEL HOUSING.
5
CONTROL DIAL for setting the temperature of the heating plate.
6
HEATING INDICATOR—illuminated, while the heating element is in operation.
7
TURN TABLE: place the heating base onto the central platform and distribute the fondue dishes in the openings of the revolving disc.
8
8 STAINLESS STEEL FONDUE DISHES fitting perfectly into the openings of the revolving disc.
9
8 STAINLESS STEEL FONDUE FORKS—for piercing your food; fitting into the grooves in the forks holder.
9
1
2
3
5
4
EN
45