Troubleshooting - Silvercrest SDI 3500 B1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SDI 3500 B1
Dirt and burnt-on food residues on the surface of the heating zones (1, 3) can be cleaned off using a
scraper for glass hotplates and an appropriate detergent.

9. Troubleshooting

If your induction hotplate does not work as normal, follow the instructions below to try to solve the
problem. If working through the tips below does not fix the fault, please contact our hotline (see
"Warranty information" on page 85).
Risk of electric shock!
Never try to repair the appliance yourself.
Problem
Induction hotplate not
working
Heating zone (1 or 3)
not getting hot
Error E0 is shown on
the display (8)
84 - English
Possible cause
Power cable (2) not
connected.
Child lock activated.
No pan on the heating
zone (1 or 3)
Cookware not suitable for
induction
Incorrect heating zone (1,
3) switched on
No pan on the heating
zone (1 or 3)
Incorrect heating zone (1,
3) switched on
Cookware not suitable for
induction
Cookware is too small in
diameter or not standing
centrally on the heating
zone (1 or 3).
Remedy
Connect the power cable (2) to a live mains
socket.
Press and hold the button (14) for 3 seconds to
deactivate the child lock.
Place a pan on the heating zone (1 or 3).
Only use cookware which is suitable for
induction hotplates.
Operate the left heating zone (1) using the
on/off switch (11) on the left control panel
(B). Operate the right heating zone (3) using
the on/off switch
panel (C).
Place a pan on the heating zone (1 or 3).
Switch the correct heating zone (1 or 3) on or
move the pan to the heating zone (1 or 3) you
have switched on.
Only use cookware which is suitable for
induction hotplates.
Only use cookware with a diameter of between
16 and 26 cm and place it on the centre of the
heating zone (1 or 3).
(11) on the right control