Starting A Drying Programme - Electrolux EDI97170W Benutzerinformation

16 electrolux
restarting the appropriate programme, this
time with the DROOGTEGRAAD (DRYNESS)
function selected and dryness level MIN,
MED or MAX. In the case of a drying cycle
with relatively dry laundry, the length of the
programme cycle displayed at the beginning
is corrected after a while.
Caution! Caution: Make sure that by
selecting the DROOGTEGRAAD
(DRYNESS) function, you do not over-
dry your wool or silk.
LAGE TEMP. (DELICATE)
For especially gentle drying of sensitive fab-
rics with the care label and for temperature-
sensitive textiles (e.g. acrylic, viscose). Pro-
gramme is executed with reduced heat.
LAGE TEMP. (DELICATE) is only suitable for
use with loads of up to 3kg.
1. Press the LAGE TEMP. (DELICATE) but-
ton. The LAGE TEMP. (DELICATE)
symbol appears in the display.
TIJD (TIME)
To select the programme duration after set-
ting the TIJD (TIME) programme. You can

Starting a drying programme

Press the START/PAUZE button. The pro-
gramme is started. The programme progress
display shows drying progress. The symbols
for DRYING and
the display one after the other. The number
of droplets in the dryness indicator gradually
goes down as the drying process progress-
es.
Changing a programme
To change a programme which has been se-
lected by mistake once the programme has
started, first turn the programme selector to
O OFF and then reset the programme.
The programme can no longer be
changed directly once the programme
has started. If you nevertheless attempt
to change the programme with the pro-
gramme knob or an additional function
button (except the ZOEMER (BUZZER)
button), the START/PAUZE button and
will flash in the multi-display. The
drying programme is not however affec-
ted by this.
COOLING appear in
select a programme duration from 10 mi-
nutes to 3 hours in 10-minute steps. (corre-
sponding to the
1. Turn the programme knob to the
TIMED PROGRAMME. The
minutes is in the display
2. Press the TIJD (TIME) button repeatedly
until the desired programme duration is
shown in the display, e.g.
for a programme of 20 minutes.
If the programme duration is not selected,
the duration is automatically set to 10 mins.
ZOEMER (BUZZER)
See chapter "Iron AidTM Steam System" ,
section "Selecting additional functions -
ZOEMER (BUZZER)"
STARTUITSTEL (DELAY)
See chapter "Iron AidTM Steam System" ,
section "Selecting additional functions -
STARTUITSTEL (DELAY)"
CHILD LOCK
See chapter "Iron AidTM Steam System" ,
section "Selecting additional functions -
CHILD LOCK"
Removing laundry or loading laundry
when necessary
Warning! Laundry and drumcan be-
come hot. Risk of burns!
1. Open loading door
2. Load or remove laundry items.
3. Close the door securely. Lock must au-
dibly lock.
4. Press the START/PAUZE button to con-
tinue the drying cycle.
Drying cycle complete / removing
laundry
Once the drying programme has finished,
CREASE GUARD lights up in the display.
If the ZOEMER (BUZZER) is activated, an
audible signal sounds at regular intervals.
The drying cycle is automatically fol-
lowed by a anti-crease phase which
lasts around 30 minutes.
The drum rotates at intervals during this
phase. This keeps the laundry loose and free
of creases. It can be removed at any time
during the anti-crease phase. (The laundry
COOLING programme).