Herunterladen Inhalt Inhalt Diese Seite drucken

Machine Settings; Hints For Test Institutes; Installation; Appliance Positioning - Electrolux EDI97170W Benutzerinformation

Iron aid
Vorschau ausblenden Andere Handbücher für EDI97170W:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

24 electrolux
COTTONS (KATOEN) IRON DRY
SYNTHETISCH (SYNTHETICS) KASTDROOG
2)
(CUPBOARD) DRY
1) Different loading volume data may be needed in some countries as a result of different measuring
methods.
2) in accordance with EN 61121

Machine settings

Setting
ZOEMER (BUZZER) perma-
nent off
Water hardness
Water contains, a variable
quantity of limestone and min-
eral salts of which quantities
vary according to geographical
locations thus varying its con-
ductivity values.
Relevant variations of the con-
ductivity of the water compared
to those prefixed by the factory
could slightly influence the re-
sidual humidity of the laundry at
the end of the cycle. Your dryer
allows you to regulate the sen-
sitivity of the drying sensor
based on conductivity values of
the water.

Hints for test institutes

Parameters possible to checked by the Test
Institutes:
• Energy consumption (corrected with final
humidity) during the cupboard dry cotton
cycle with nominal load.
• Energy consumption (corrected with final
humidity) during the cupboard dry cotton
cycle with half load.
• Final humidity (during cupboard dry cot-
ton, iron dry cotton and cupboard dry easy
care)

Installation

Important! The appliance must be moved in
vertical position for transport.
2)
3.3 (7 kg load pre-drained at 1000 rpm)
1,3 (3 kg load pre-drained at 1200 rpm)
1. Turn the programme selector to any programme.
2. Press simultaneously the DROOGTEGRAAD and LAGE
TEMP. buttons and hold down for approx. 5 seconds.
3. The buzzer is by default always off. You can use ZOEMER but-
ton to activate or deactivate sound but machine does not mem-
orize your selection.
1. Turn the programme selector to any programme.
2. Press simultaneously the LAGE TEMP. and START/PAUZE
buttons and hold down for approx. 5 seconds. The current set-
ting is on the display:
low conductivity <300 micro S/cm
medium conductivity 300-600 micro S/cm
high conductivity >600 micro S/cm
3. Press the START/PAUZE button sequentially until you set de-
sired level.
4. To memorize setting press simultaneously the the LAGE TEMP.
and START/PAUZE buttons or turn knob to O OFF position
• Condensation efficiency (corrected with fi-
All the cycles have to be checked in accord-
ance with EN 61121 (Tumble dryers for
household use – Methods for measuring the
performance).

Appliance positioning

• It is recommended that, for your conven-
Implementation
nal humidity) during cupboard dry cotton
cycle with nominal and half load
ience, the machine is positioned close to
your washing machine.

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis