Electrolux EDI97170W Benutzerinformation Seite 11

Programme
COTTONS (KA-
TOEN)
SYNTHETISCH
(SYNTHETICS)
COTTONS (KA-
TOEN)
SYNTHETISCH
(SYNTHETICS)
OPFRISSEN (RE-
FRESH)
1) exact programme times appear in the display once the machine has performed wet/dry recognition
(approx. 2 min.)
All information provided on select-
ing the steam level and correspond-
ing load are suggestions only. In
some cases, using a higher steam
level or smaller load may give better
results. The
FRESH) programme is a gentle Iron
Aid programme for nonwashable
textiles. Any distortion to the shape
of a garment which might occur in
few cases, can be remedied by iron-
ing.
Selecting the programme
Use the programme selector to set the pro-
gramme you require. The estimated pro-
gramme duration (in minutes) appears in the
multi-display.
BELAD-
ING Loading volume
(LOAD)
1 - 2 shirts
MIN
3 - 4 shirts
MED
MAX
5 - 6 shirts
1 - 2 shirts
MIN
3 - 4 shirts
MED
MAX
5 - 6shirts
0.5 - 1 kg
MIN
1 - 2 kg
MED
MAX
2 - 3 kg
0.2 - 0.5 kg
MIN
0.5 - 1 kg
MED
MAX
1 - 1.5 kg
1 pair of trousers
MIN
1 jacket
MED
MAX
1 suit
OPFRISSEN (RE-
DURATION
1)
dry [min.]
20-23
14-17
13-16
12-16
12-16
Select steam level
(LOAD))
To achieve the best results, different steam
levels are required for different volumes of
laundry.
The BELADING (LOAD) button is used to set
the required steam level: MIN, MED or MAX.
All Iron Aid programmes, apart from the
OPFRISSEN (REFRESH) programme, auto-
matically recognise the remaining dampness
in clothes. When laundry is wet, a drying cy-
cle is activated first if required.
The table shows the steam levels appropriate
for the selected load, under BELADING
(LOAD).
1. Press the BELADING (LOAD) button re-
peatedly until the desired steam level
(MIN, MED or MAX) is shown in the dis-
play.
If the BELADING (LOAD) button is not press-
ed after an Iron Aid programme is selec-
ted, then medium steam level (MED) is se-
electrolux 11
DURATION
1)
wet [min.]
41-51
24-49
53-64
43-53
(BELADING