Safety notes
DANGER
Suitable measures (e.g. safety valves)
have to be taken to ensure that the
maximum operating pressures and
maximum operating temperatures
are not exceeded..
WARNING
Heavy product group!
Risk of injury! Suitable transport and
lifting devices are to be used. Wear
suitable protective clothing (e.g. safety
shoes) during installation and use
safety devices. External components
like handwheels or pressure test
points must not be misused for the
absorption of external forces, e.g. as
connection point for lever tools etc.
Hot or cold surfaces!
Risk of injury! Do not touch the
product group without safety gloves.
It may get very hot or cold during
operation.
Sharp edges!
Risk of injury! Only touch with safety
gloves. Threads, bore holes and
edges are sharp.
Small components!
Risk of ingestion! Store and install
the components of the product group
out of reach of children.
Allergies!
Health hazard! Do not touch the
product group and avoid any contact
if allergies against the used materials
are known.
4
"Regumat-180 plus" DN 32
3.
Transport, storage and
packaging
3.1 Extent of supply
• Pre-assembled product group
"Regumat-180 plus" DN 32 with wall
bracket
• Universal thermal insulation of modular
construction; consisting of front and rear
insulation shell, two-part insertion block
suitable for the installation of standard high-
efficiency pumps
• Sealing set (4-fold)
• Pump installation set (stations without
pump)
3.2 Transport inspection
Upon receipt check delivery for any damages
caused during transit and for completeness.
Any damage must be reported immediately
upon receipt.
3.3 Storage
The boiler connection system must only be
stored under the following conditions:
• Do not store in open air, keep dry and free
from dust.
• Do not expose to aggressive fluids or heat
sources.
• Protect from direct sunlight and mechanical
agitation.
• Storage temperature: –20°C up to +60°C
• Max. relative humidity of air: 95 %
3.4 Packaging
Packaging material is to be disposed of in an
environmentally friendly manner.