Regumat-180 Plus" Dn; General Information; Information Regarding Installation And Operating Instructions; Keeping Of Documents - oventrop Regumat-180 plus Einbau- Und Betriebsanleitung Für Fachpersonal

General information

1. General information
1.1 Information regarding installation
and operating instructions
These installation and operating instructions
serve the installer
connection system professionally and to put it
into operation.
Other valid documents – manuals of all
system components, especially the operating
instructions of the high-efficiency pump, as well
as valid technical rules – must be observed.

1.2 Keeping of documents

These installation and operating instructions
should be kept by the user of the system.

1.3 Copyright

The installation and operating instructions are
copyrighted.

1.4 Symbol explanation

Safety guidelines are displayed by symbols.
These guidelines are to be observed to
avoid accidents, damage to property and
malfunctions.
DANGER
Indicates an imminent danger with
high risk which will lead to death or
serious injury if the situation is not
avoided.
WARNING
Indicates a possible danger with
moderate risk which may lead to
death or serious injury if the situation
is not avoided.
to install the boiler

"Regumat-180 plus" DN 32

CAUTION
Indicates a possible danger with low
risk which may lead to minor and
reversible injury if the situation is not
avoided.
NOTICE
Indicates a possible damage to
property which may occur if the
safety guidelines are not observe.
2.

Safety notes

2.1 Correct use

The product group "Regumat" is solely
designed for use in the heating sector. Acting
as a link between the heat generator and local
heating circuits, it serves the supply of heating
water to radiators, a surface heating or a
storage cylinder according to requirements.
Safety in operation is only guaranteed if the
boiler connection system is used correctly. Any
use of the boiler connection system outside
the above applications will be considered as
non-compliant and misuse. Claims of any kind
against the manufacturer and/or his authorised
representatives due to damages caused by
incorrect use cannot be accepted.
The observance of the installation and operating
instructions is part of the compliance terms.
2.2 Possible dangers at the installation
location and during transport
The case of an external fire has not been taken
into consideration when constructing the boiler
connection system.
3