hilscher DTM Bedienungsanleitung Seite 138

Fehlercodes
cifX-treiberspezifische ODM-Fehlercodes
Fehlercode (Definition)
DRV_E_FW_NO_FILE_PATH
DRV_E_CF_FILE_OPEN_FAILED
DRV_E_CF_FILE_SIZE_ZERO
DRV_E_CF_FILE_NO_MEMORY
DRV_E_CF_FILE_READ_FAILED
DRV_E_CF_INVALID_FILETYPE
DRV_E_CF_FILENAME_INVALID
DRV_E_CF_DOWNLOAD_ERROR
DRV_E_CF_FILE_NO_SEGMENT
DRV_E_CF_DIFFERS_FROM_DBM
DRV_E_DBM_SIZE_ZERO
DRV_E_DBM_NO_MEMORY
DRV_E_DBM_READ_FAILED
DRV_E_DBM_NO_FLASH_SEGMENT
DEV_E_CF_INVALID_DESCRIPT_VERSION
DEV_E_CF_INVALID_INPUT_OFFSET
DEV_E_CF_NO_INPUT_SIZE
DEV_E_CF_MISMATCH_INPUT_SIZE
DEV_E_CF_INVALID_OUTPUT_OFFSET
DEV_E_CF_NO_OUTPUT_SIZE
DEV_E_CF_MISMATCH_OUTPUT_SIZE
DEV_E_CF_STN_NOT_CONFIGURED
DEV_E_CF_CANNOT_GET_STN_CONFIG
DEV_E_CF_MODULE_DEF_MISSING
DEV_E_CF_MISMATCH_EMPTY_SLOT
DEV_E_CF_MISMATCH_INPUT_OFFSET
DEV_E_CF_MISMATCH_OUTPUT_OFFSET
DEV_E_CF_MISMATCH_DATA_TYPE
DEV_E_CF_MODULE_DEF_MISSING_NO_SI
DTM für EtherNet/IP-Scanner-Geräte | Konfiguration von EtherNet/IP-Scanner-Geräten
DOC061201OI07DE | Revision 7 | Deutsch | 2013-09 | Freigegeben | Öffentlich
Tabelle 68: cifX-treiberspezifische ODM-Fehlercodes
Wert Beschreibung
0x8004C077 USER Firmware file no file path
0x8004C078 USER Configuration file could not be
opend
0x8004C079 USER Configuration file size zero
0x8004C07A USER Not enough memory to load
configuration file
0x8004C07B USER Configuration file read failed
0x8004C07C USER Configuration file type invalid
0x8004C07D USER Configuration file name not valid
0x8004C07E USER Configuration file download error
0x8004C07F USER No flash segment in the
configuration file
0x8004C080 USER Configuration file differs from
database
0x8004C083 USER Database size zero
0x8004C084 USER Not enough memory to upload
database
0x8004C085 USER Database read failed
0x8004C086 USER Database segment unknown
0x8004C096 CONFIG Version of the descript table
invalid
0x8004C097 CONFIG Input offset is invalid
0x8004C098 CONFIG Input size is 0
CONFIG Input size does not match
0x8004C099
configuration
0x8004C09A CONFIG Invalid output offset
0x8004C09B CONFIG Output size is 0
0x8004C09C CONFIG Output size does not match
configuration
0x8004C09D CONFIG Station not configured
0x8004C09E CONFIG Cannot get the Station
configuration
0x8004C09F CONFIG Module definition is missing
0x8004C0A0 CONFIG Empty slot mismatch
0x8004C0A1 CONFIG Input offset mismatch
0x8004C0A2 CONFIG Output offset mismatch
0x8004C0A3 CONFIG Data type mismatch
CONFIG Module definition is missing,(no
0x8004C0A4
Slot/Idx)
138/154
© Hilscher, 2006-2013