Cip-Connection-Manager-Object-Instance-Codes Zum Erweiterten Status - hilscher DTM Bedienungsanleitung

Fehlercodes
9.5.1 CIP-Connection-Manager-Object-Instance-Codes
Erweiterten Status
CIP Connection-Manager-Object-Instance Codes zum Erweiterten Status
Allgemeiner Erweiterter
Status (hexa Status
dezimal)
0x00
0x01 0x0000
through
0x00FF
0x01 0x0100
0x01 0x0101
through
0x0102
0x01 0x0103
0x0104
0x01
through
0x0105
0x01 0x0106
0x01 0x0107
0x01 0x0108
0x01 0x0109
DTM für EtherNet/IP-Scanner-Geräte | Konfiguration von EtherNet/IP-Scanner-Geräten
DOC061201OI07DE | Revision 7 | Deutsch | 2013-09 | Freigegeben | Öffentlich
Zusätzlich zu den Allgemeinen CIP-Fehlercodes sind die CIP Connection-
Manager-Object-Instance Codes zum Erweiterten Status gültig.
Beschreibung
Service completed successfully
Obsolete
CONNECTION IN USE OR DULTPLICATE FORWARD OPEN
This extended status code shall be returned when an originator is trying to make
connection to a target with which the originator may have already established a
connection (Non-Null/matching Forward_Open — see section 3-5.5.2.1.2).
[Ref.] THE CIP NETWORKS LIBRARY, Volume 1
Reserved by CIP
TRANSPORT CLASS AND TRIGGER COMBINATION NOT SUPPORTED
A transport class and trigger combination has been specified which is not
supported by the target. Routers shall not fail the connection based on the
transport class and trigger combination. Only targets shall return this extended
status code.
Reserved by CIP
OWNERSHIP CONFLICT
The connection cannot be established since another connection has exclusively
allocated some of the resources required for this connection. An example of this
would be that only one exclusive owner connection can control an output point on
an I/O Module. If a second exclusive owner connection (or redundant owner
connection) is attempted, this error shall be returned. This extended status code
shall only be returned by a target node.
TARGET CONNECTION NOT FOUND
This extended status code shall be returned in response to the forward_close
request, when the connection that is to be closed is not found at the target node.
This extended status code shall only be returned by a target node. Routers shall
not generate this extended status code. If the specified connection is not found at
the intermediate node, the close request shall still be forwarded using the path
specified in the Forward_Close request.
INVALID NETWORK CONNECTION PARAMETER
This extended status code shall be returned as the result of specifying a
connection type, connection priority, redundant owner or fixed / variable that is not
supported by the target application. Only a target node shall return this extended
status code.
INVALID CONNECTION SIZE
This extended status code is returned when the target or router does not support
the specified connection size. This could occur at a target because the size does
not match the required size for a fixed size connection. It could occur at a router if
the requested size is too large for the specified network.
An additional status may follow indicating the maximum connection size supported
by the responding node. The additional status word is required when issued in
response to the Large_Forward_Open.
127/154
zum
© Hilscher, 2006-2013