Maintenance; Fuse Replacement - Apex Pro-care 2 Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

Pro-care 2 / English

7. Maintenance

7.1 General

1. Check main power cord and plug if there is abrasions or excessive wear.

2. Check mattress cover for signs of wear or damage. Ensure mattress cover and tubes are stubbed to-

gether correctly.

3. Check airflow from the quick connector. The airflow should alternate between each connector every

half-cycle time if it's in alternating mode.

4. Check the air hoses if there is kink or breaks. For replacement, please contact our local dealers.

7.3 Air Filter Replacement

1. Disconnect the plug form mains power when a

blown fuse is suspected.

2. Remove the cover of the fuse holder by means of a

small screwdriver.

3. Insert a new fuse of the correct rating in, and re-

place the cover of the fuse holder back. The fuse

should be rated as T1AL/250V type and VDE ap-

proved.

1. Open the air filter cap located at the back of

pump.

2. Replace with a clean filter and put the cover lid

back. The filter is reusable and can be washed

gently with a mild detergent and water. Dry the

filter before use.

3. Check

and

replace

environment is dirty. Suggested to do it every

three month.

air

filter

regularly

Inhaltsverzeichnis