Tyre Pressure - Stiga MP 84C Gebrauchsanweisung

5.3.2 Tyre pressure

Having the right tyre pressure is the main condi-
tion for ensuring that the cutting deck is horizon-
tal and mows evenly.
(13 x 5,00-6)
(15 x 5,00-6)
Unscrew the valve
caps and connect a
compressed air line
with a gauge to the
valves and adjust the
pressure to the indi-
cated values.
5.3.3 Filling with oil and fuel
NOTE
cates what type of oil and fuel you can use.
With the engine
off, check the oil
level. According
to the instruc-
tions in the
engine manual,
this must be be-
tween the MIN
and MAX marks
on the dipstick.
Refuel using a
funnel, but do
not completely
fill the tank. The
tank's capacity is
about 6.5 liters.
DANGER!
carried out in an open or well­ventilated
area with the engine off. Always remember
that petrol fumes are inflammable.
he engine manual indi-
Refuelling should be
DO NOT USE A NAKED FLAME TO LOOK
INSIDE THE TANK AND DO NOT SMOKE
WHEN REFUELLING.
IMPORTANT
the plastic parts to avoid damaging them. In
the event of accidental spills or leaks, rinse im-
mediately with water. The warranty does not
cover for damage to plastic parts of the body-
work or the engine caused by petrol..
5.3.4 Fitting the exit guards (grass-catcher
or rear discharge guard)
WARNING!
chine without having fitted the discharge
guards!
1
Fasten the grass-catcher (1) to the brackets (2)
and centre it with regard to the rear plate.
Centering is en-
sured by using the
right bracket as
lateral support.
Make sure that
the lower pipe
of the grass-
catcher opening
is attached to the
pawl (3).
Do not drip petrol onto
Never use the ma­
2
3
EN 15