HAPRO luxura x7 Anleitung Seite 16

Messages
GENERAL
ERROR
Attention:
If one of the error messages appears on the display, you should stop using the sunbed, unplug the appliance and contact your
dealer.
16
1: ENG L
1: ENG L
"Not present"
If an option is not available on the appliance, the message "NOT PRESENT" will scroll across the bottom of the display.
This means that the function in question is not available to use.
Cooling down (appliance / face tanner)
When the appliance or the face tanner is switched off, a mandatory cooling off period will start automatically.
An hourglass will appear at the top of the display and a number will appear at the bottom (indicating the remaining
cooling off time in seconds).
Appliance = 180 sec.
Face tanner (only SLi) = 235 sec.
Airco (optional) = 300 sec.
If an error occurs, "ERROR" will scroll across the top of the display, and a code will appear at the bottom.
E1 = Internal timer has a defect
E2 = Fan in bottom tray has a defect
E3 = Communication error between relay and switch part
1: ENG R
1: E