HAPRO luxura x7 Anleitung Seite 13

Face tanners (only SLi)
The <11> button is used to switch both the outside two as the centre face tanner(s) to their minimum setting. The
<10> button is used to switch both the outside two as the centre face tanner(s) to their maximum setting.
The level of intensity will appear at the top of the display, and "FACIAL TANNER" will scroll across the bottom.
Setting 1: All face tanners on minimum setting
Setting 2: Centre face tanner(s) on maximum, outside face tanners on minimum setting
Setting 3: All face tanners on maximum setting
Press <11> for 3 seconds to switch off the face tanner.
Once the face tanner has been switched off, it must cool down for 4 minutes before it can be switched on again.
If the <10> button is pressed during cool-down, the display will show the remaining cooling down time.
Airconditioning (optional)
Press <8> 1x to switch the function on or off.
The level of intensity will appear at the top of the display, and "AIRCO" will scroll across the bottom.
Setting "ON" = Airco is on
Setting "OFF"= Airco is off
When the tanning session starts Airconditioning will be active.
Once the air conditioning has been switched off, it must cool down for 3 minutes before it can be switched on again.
If the <8> button is pressed during cool-down, the display will show the remaining cooling down time.
13
1: ENG R