HAPRO luxura x7 Anleitung Seite 12

Note:
If you do not press any key for 3 seconds, you will exit the function mode automatically. The (remaining) tanning time will ap-
pear in the display.
12
1: ENG L
1: ENG L
Body Cooling
The <15> button is used to decrease the body cooling.
The <14> button is used to increase the body cooling.
The level of intensity will appear at the top of the display, and "BODY COOLER" will scroll across the bottom.
The body cooling can be set to 4 different levels.
Setting 0: Body cooling is off
Setting 1: Body cooling on minimum setting
Setting 2:
Setting 3: Body cooling on maximum setting
Face cooling
The <13> button decreases the face cooling.
The <12> button increases the face cooling.
The level of intensity will appear at the top of the display, and "FACE COOLING" will scroll across the bottom.
The face cooling can be set to 4 different levels.
Setting 0: Face cooling is off
Setting 1: Face cooling on minimum setting
Setting 2:
Setting 3: Face cooling on maximum setting
Extra face tanning + Extra body tanning (only SPr)
The <11> button is used to switch the small SPr lamps above the body on and off.
Use the <10> buttons to switch the SPr lamps above the face on and off.
The level of intensity will appear at the top of the display, and "BODY TANNER" / "FACE TANNER" will scroll across the
bottom.
Setting "1" = face/ Body tanner minimum
Setting "2" = face /Body tanner maximum
When the tanning session starts setting 1 will be active.
1: ENG R
1: E