Using With Other Equipment; Connecting A Decoder; Connecting A Dvd Player - Pioneer KRP-600A Bedienungsanleitung

Using with other equipment

Chapter 12
Using with other equipment
You can connect many types of external equipment to your flat
screen TV, like a decoder, VCR, DVD player, game console, personal
computer and camcorder.
To view images coming from external equipment, select the input
source using INPUT 1 to INPUT 5 or PC on the remote control
(page 14) or INPUT on the Media Receiver.
Caution
• To protect all equipment, always unplug the flat screen TV from
the power outlet before connecting to a decoder, VCR, DVD
player, game console, personal computer, camcorder or other
external equipment.
Note
• Refer to the relevant operation manual (DVD player, etc.)
carefully before making connections.
• Unless stated otherwise, the connecting cables shown in the
illustrations are readily available commercially, but are not
supplied with this product.

Connecting a DVD player

Use the INPUT 2 terminals when connecting to a DVD player and
other audiovisual equipment.
When using a component video cable, select "COMPONENT" in the
"Input" menu and "SCART" in the "Audio Select" menu (see
Selecting an input signal type on page 59). In this case, the SCART
cable will carry the audio signal.
If you want the audio cable to carry the audio signal, connect the
audio cable to the INPUT 2 terminals (Audio) and select "RCA" in
the "Audio Select" menu.
Media Receiver (rear)
UT 1 INPUT 2 AUDIO
LAN (10 / 100) DIGITAL OUT
UT 3
HDMI
OPTICAL INPUT 1 INPUT 3
SCART cable
Stereo
audio cable
DVD player
Y P B P R
L
COMPONENT VIDEO
R
R L
INPUT 2 SUB WOOFER OUT AUDIO OUT
SERVICE ONLY
CONTROL SYSTEM
CABLE
OUT
HDMI HDMI
INPUT 4
Component
video cable
DVD playback
To watch a DVD, press INPUT 2 on the remote control unit or press
INPUT on the Media Receiver to select "INPUT 2".
Note
• If DVD images do not come in clearly, you may need to change
the input signal type setting using the menu. See page 59.
• Refer to your DVD player operation manual for the signal type.

Connecting a decoder

Use the INPUT 1 terminal when connecting a decoder and other
audiovisual equipment.
ANT
SAT
Media Receiver (rear)
Decoder
Displaying a decoder image
Press buttons 0 to 9 or P+/P– to select a programme specified for
decoder setting (page 36).
Press INPUT 1 on the remote control unit or press INPUT on the
Media Receiver to select "INPUT 1".
Note
• If decoder images do not come in clearly, you may need to
change the input signal type setting using the menu. See
page 59.
• Refer to your decoder operation manual for the signal type.
Y P P
B R
COMPONENT VIDE
INPUT 1 INPUT 2
AUDIO R L
INPUT 2 SUB WOOFER O
LAN (10 / 100) DIGITAL OUT
INPUT 3
HDMI HDMI HDMI
OPTICAL INPUT 1 INPUT 3 INPUT 4
SCART cable
12
C
OU
65
En