Turning The Power On/Off - Pioneer KRP-600A Bedienungsanleitung

06 Watching TV
Chapter 6
Watching TV
Important
• Before watching broadcast channels, the built-in TV tuner must
be set up. See Setting up TV channels on page 33 for how to do
this.

Turning the power on/off

Note
• When the Media Receiver is plugged into a power outlet, it is
placed into standby mode; the STANDBY indicator on its front
panel should flash red. The Media Receiver stays in standby
mode unless it is unplugged from the power outlet.
To turn on the system, press the Power On (a) button on the
display.
• The Power ON indicators on the display and Media Receiver
light up blue.
To turn off the system, press a on the remote control unit or
STANDBY/ON on the Media Receiver.
• The display and Media Receiver are placed into standby mode;
their respective STANDBY indicators light up red.
• You can then turn on the system again by pressing a or 0 to 9
on the remote control unit or STANDBY/ON on the Media
Receiver.
• If you press 0 on the remote control unit, images from "INPUT 1"
will be displayed.
• If you press 1 to 9, TV images will be displayed.
You can also press the Power On (a) button on the display to turn
off the system. However, you cannot then turn on the system again
by pressing the buttons on the remote control unit and Media
Receiver.
Display
Power ON indicator
Power On ( ) button
a
24
En
Power ON indicator
• When the Power On (a) button on the display is off, you cannot
• While the system is placed into standby mode, pressing remote
• When the system is placed into standby mode, the main power
STANDBY indicator
• If you are not going to use the flat screen TV for a long period of
STANDBY indicator
ON STANDBY TIMER
STANDBY/ON
USB HDMI
INPUT VOLUME CHANNEL
PHONES INPUT 5
STANDBY/ON button
Note
turn the power on by pressing a or 0 to 9 on the remote control
unit or STANDBY/ON on the Media Receiver.
control's a causes the flat screen TV to turn on.
flow is cut and the system is no longer fully operational. A minute
flow of power feeds the system to maintain operational readiness.
time, be sure to remove the power cord from the power outlet.
KRP-M01
COMMON INTERFACE 2 SATELLITE
VIDEO L AUDIO R ANALOG RGB  EJECT
COMMON INTERFACE 1 TERRESTRIAL
PC
Media Receiver (front)