Changing The Brightness At Both Sides Of The Screen (Side Mask); Room Light Sensor; Blue Led Dimmer - Pioneer KRP-600A Bedienungsanleitung

11 Useful adjustment settings
Selecting a wide mode
The HD Wide Mode adjusts the side masks that appear in a 4:3
image. Select from "Mode 1" or "Mode 2" when "Wide-Zoom" is
selected in "Auto Size".
1 Repeat steps 1 to 3 provided for
mode (AV source only) .
2 Select "Side Mask" (/ then ENTER).
3 Select "HD Wide Mode" (/).
4 Select "Mode 1" or "Mode 2" (/).
If you select "Mode 1", Side Mask Detection is automatically set to
"WIDE 1" when side masks are detected with "Wide-Zoom" for Auto
Size setting.
If you select "Mode 2", Side Mask Detection is automatically set to
"WIDE 2" when side masks are detected with "Wide-Zoom" for Auto
Size setting.
5 Press HOME MENU to exit the menu.
Changing the brightness at both sides
of the screen (Side Mask)
With the 4:3, FULL 14:9, or CINEMA 14:9 screen size, you can
change the brightness of the grey side masks that appear at both
sides of the screen.
1 Repeat steps 1 to 3 provided for
mode (AV source only) .
2 Select "Side Mask" (/ then ENTER).
3 Select "Brightness Sync." (/).
4 Select the desired parameter (/).
Item Description
Always sets the same brightness for the grey side
Fixed
(default) masks
Adjusts the brightness of the grey side masks
Auto
according to the brightness of images
Important
• The "Auto" setting adjusts the brightness of the side masks
according to the brightness of the screen and can reduce the
possibility of image retention.
5 Press HOME MENU to exit the menu.
62
En
Switching the vertical drive
Switching the vertical drive

Room Light Sensor

This function automatically adjusts the brightness of the display
panel in accordance with the brightness level of the viewing area.
For details, use the following procedure.
1 Repeat steps 1 to 3 provided for
mode (AV source only) .
2 Select "Room Light Sensor" (/ then ENTER).
3 Select "Mode 1", "Mode 2" or "Off" (/ then ENTER).
Item Description
Mode 1 Automatically adjusts the picture brightness for
the best possible image quality based on the
information collected at the Room Light Sensor
and Colour Sensor
Mode 2 Automatically adjusts the picture brightness and
colouring for best image quality possible for the
viewing environment based on the information
collected at the Room Light Sensor and Colour
Sensor
Off Deactivates the Room Light Sensor function
4 Press HOME MENU to exit the menu.
Note
• As this function automatically optimizes image quality, the
process in which image settings such as brightness and tint
gradually change may be seen on the screen. This is not a
malfunction.
• If the colour sensor is not in use, adjustments are made for
"Mode 1" and "Mode 2" based on the information collected at
the Room Light Sensor.

Blue LED Dimmer

You can adjust the brightness of the Power ON indicator depending
on the brightness level of the viewing area. When "Auto" is selected,
the brightness of the indicator changes to "High", "Mid" or "Low" to
match the brightness level of the viewing area.
1 Repeat steps 1 to 3 provided for
mode (AV source only) .
2 Select "Blue LED Dimmer" (/ then ENTER).
3 Select "Auto", "High", "Mid" or "Low" (/ then ENTER).
4 Press HOME MENU to exit the menu.
Orbiter
This function automatically shifts the image little by little to reduce
the occurrence of the burning.
1 Repeat steps 1 to 3 provided for
mode (AV source only) .
2 Select "Orbiter" (/ then ENTER).
3 Select "Mode 1" or "Mode 2" (/ then ENTER).
Switching the vertical drive
Switching the vertical drive
Switching the vertical drive