Using Colour Temp - Pioneer KRP-600A Bedienungsanleitung

Setting up
ACL (Automatic Contrast Limiter)
Performs such compensation that results in the optimum contrast
characteristics for images
Selections Off Deactivates ACL
On Activates ACL
Enhancer Mode
Selects processing of the image's high frequency (detailed) areas
to find the right balance between preserving picture detail and
eliminating unwanted noise
Selections 1 Selects Hard (SHARPNESS) image
2 Selects Natural (SHARPNESS) image
3 Selects Soft (SHARPNESS) image
Gamma
Adjusts the gamma characteristics (image gradation
characteristics) to find the right balance between contrast and
maintaining dark details
Selections 1 Delivers uniformly contrast-rich images
2 Delivers a well balanced image, applying
delicate in-picture contrast enhancement
3 Delivers an overall slightly brighter image,
revealing more gradation details
5 Press HOME MENU to exit the menu.

Using Colour Temp

1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "Picture" (/ then ENTER).
4 Select "Pro Adjust" (/ then ENTER).
5 Select "Colour Detail" (/ then ENTER).
6 Select "Colour Temp" (/ then ENTER).
7 Select the desired parameter (/ then ENTER).
Colour Temp
Adjusts the colour temperature, resulting in a better white balance
Selections High Cool white tone
Mid-High Intermediate tone between High and Mid
Mid Natural tone
Mid-Low Intermediate tone between Mid and Low
Low Warm white tone
Manual Colour temperature adjusted to your
preference
You may rather want to perform fine adjustment. To do this, select
"Manual" first and then press and hold ENTER for more than three
seconds. The manual adjustment screen appears. Then go to step
8.
8 Select an item to be adjusted (/ then ENTER).
9 Select the desired level (/).
 button
Item
R High Fine adjustment For weaker red
for bright portions
For weaker green For stronger
G High
B High For weaker blue
Fine adjustment For weaker red
R Low
for dark portions
G Low For weaker green For stronger
B Low For weaker blue
To perform adjustment for another item, press RETURN, and then
repeat steps 8 and 9.
You may press / to immediately change an item to be adjusted.
10 Press HOME MENU to exit the menu.
Using CTI and Colour Space
1 Repeat steps 1 to 5 provided for Using Colour Temp.
2 Select "CTI" or "Colour Space" (/ then ENTER).
3 Select the desired parameter (/ then ENTER).
CTI
Provides images with clearer colour contours. The CTI stands for
Colour Transient Improvement.
Selections Off
On
Colour Space
Changes the colour reproduction space
Selections 1
2
4 Press HOME MENU to exit the menu.
 button
For stronger red
green
For stronger blue
For stronger red
green
For stronger blue
Deactivates CTI
Activates CTI
Optimized for vivid, vibrant colour
reproduction
Standard colour reproduction
08
41
En