Electrical Safety; Package Contents - DeWalt D28700 Anleitung

The following factors are of influence to noise
production:
– the material to be cut
– the type of the cutting disc
– the feed force
Take appropriate measures for the
protection of hearing.
Residual risks
The following risks are inherent to the use of these
machines:
– injuries caused by touching the rotating parts
– injuries caused by disruption of the cutting disc
These risks are most evident:
– within the range of operation
– within the range of the rotating machine parts
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Risk of accidents caused by the uncovered parts
of the rotating cutting disc.
– Risk of injury when changing the disc.
– Risk of squeezing fingers when opening the guards.

Package contents

The package contains:
1 Chopsaw
1 Cutting disc
1 Allen key
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
Your D28700 chopsaw has been designed for the
cutting of variously shaped steel materials.
1 On/off switch
2 Operating handle
3 Carrying handle
4 Guard
5 Cutting disc
6 Spindle lock
7 Material clamp
8 Fence
9 Mounting holes
10 Cutting table
11 Spark deflector
12 Depth stop
13 Lock-down pin
14 Allen key

Electrical safety

The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your tool is double insulated in
accordance with EN 61029; therefore no
earth wire is required.
Mains plug replacement
(U.K. & Ireland only)
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
DeWALT repair agent or a qualified electrician.
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
• Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
• The cable wire colours, or a letter, will be marked
at the connection points of most good quality
plugs. Attach the wires to their respective points
in the plug (see below). Brown is for Live (L) (2)
and Blue is for Neutral (N) (4).
• Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the two
leads are correctly fixed at the terminal screws.
E N G L I S H
27