Adopting The Correct Posture; Selecting A Memory - Silvercrest IAN 297903 Gebrauchsanleitung Und Sicherheitshinweise

Place the free end of the cuff
tightly, around the arm and close the Velcro strip. The
cuff should not be too tight (Fig. E). Check that two
1
fingers can still fit beneath the cuff
Now insert the cuff tubing
the connector (Fig. G).

Adopting the correct posture

Note: Stay still during the measurement process and do not
talk to prevent the measurement result from being falsified.
You can carry out the measurement while sitting or lying
down. Always ensure that the cuff
level as the heart (Fig. H-J).
Sit comfortably for the blood pressure measurement.
Recline your back and arms. Do not cross your legs.
Put your feet flat on the ground.
In order not to falsify the measurement result, it is impor-
tant that you stay still and do not talk.

Selecting a memory

Press the SET button
ory ...
You have 4 memories with 30 memory spaces for
saving the measurement results of 4 different people
separately.
. Select the desired user mem-
6
by pressing the function buttons -/+
21
closely, but not too
1
(Fig. F).
1
with the cuff plug
2
is at the same
1
into
3
.
7
GB/IE/NI 21