NSK Ti-Max Z-SG45L Bedienungsanleitung Seite 6

CAUTION
• Disconnect the handpiece only after the motor has completely stopped rotating.
• Connect ONLY to E type motors (ISO 3964).
5. Insertion & Removal of the Bur
5-1 To Insert the Bur (Fig. 2)
1) Insert the bur into the chuck.
2) Depress the Push Button to open the chuck (
3) Fully insert the bur into the chuck until it stops (
4) Ensure that the bur is secure by gently pulling and pushing the bur WITHOUT depressing the Push Button.
).
) then release the Push Button.
Push Button
Fig. 2
5