Disposal Of Packaging Materials; Assembling The Appliance - Silvercrest SDM 1500 C2 Bedienungsanleitung

Disposal of packaging materials

The packaging protects the appliance from damage during transport. The packaging
materials have been selected for their environmental friendliness and ease of
disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves raw materials and
reduces the amount of waste generated. Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the appliance's original packaging during the warranty
period so that the appliance can be packed properly for return shipment
in the event of a warranty claim.
Note the labelling on the packaging and separate the packaging material compo-
nents for disposal if necessary. The packaging material is labelled with abbreviations
(b) and numbers (a) with the following meanings:
1–7: Plastics
20–22: Paper and cardboard
80–98: Composites

Assembling the appliance

♦ Push the main unit
press the main unit
♦ Attach a pad
NOTE
► If you intend to clean carpeting with the steam mop, fit the steam foot
onto the carpet ring
line with the connection nozzle
ring
glide over the carpet.
► To remove the carpet ring
aid
│ GB │ MT
■ 44
onto the connection nozzle
down until the round catch clicks into place.
from below onto the steam foot
. Ensure that the carpet ring unlocking aid
so that it clicks audibly into place. This will allow the pad
, press your foot onto the carpet ring release
and pull the steam foot
on the steam foot
.
. Push the steam foot
carefully off the carpet ring
and
is in
onto the carpet
to
.
SDM 1500 C2