Disposal Of Packaging Materials; Assembling The Appliance; Handling And Operation; Filling With Water - Silvercrest SDM 1500 B2 Bedienungsanleitung

Disposal of packaging materials

Assembling the appliance

Handling and operation

Filling with water

│
■ 8
Downloaded from www.Manualslib.com
The packaging protects the appliance from damage during transport. The packaging
materials have been selected for their environmental friendliness and ease of
disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves raw materials and
reduces the amount of waste generated. Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the appliance's original packaging during the warranty
period so that the appliance can be packed properly for return shipment
in the event of a warranty claim.
♦ Push the main unit
press the main unit
♦ Attach a pad from below onto the steam foot
NOTE
► If you intend to clean carpets with the steam mop, place the steam mop
onto the carpet ring
This section provides you with important information on handling and using the
appliance.
CAUTION – PROPERTY DAMAGE!
► Never operate the appliance without water in the water tank
The pump could overheat and be damaged!
1) Push the "Water tank" release button
tank forward and off the appliance with a tilt movement.
2) Turn the water tank
3) Fill the water tank
GB │ IE │ CY
manuals search engine
onto the connection nozzle
down until the round catch clicks into place.
. This will allow the pad
and simultaneously pull the water
and unscrew the cap.
with tap water up to the MAX mark.
on the steam foot and
.
to slide over the carpet.
!
SDM 1500 B2