EN-20
Off = disabled.
On = enabled.
"Place container" will be displayed when Automatic Tare is set to On.
5.3.6 Graduations
Set the displayed readability of the balance.
1 Division = standard readability.
10 Divisions = readability is increased by a factor of 10.
For example, if the standard readability is 0.01 g, selecting 10 Divisions will result in a displayed reading of 0.1 g.
5.3.7 Date Format
Set the current date format.
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
5.3.8 Date Setup
Set the date in the current date format.
For example, if the date format is MM/DD/YYYY, the date could be set as "06/22/2017 Thu".
5.3.9 Time Format
Set the current time format.
24HR
12HR
5.3.10 Time Setup
Set the time in the current time format.
For example, if the time format is 24HR, the time could be set as 08:00:00.
5.3.11 Brightness
Set the brightness of the display.
Low
Medium
High
5.3.12 Auto Dim
Set whether the balance automatically turns off the display backlight of the display.
Off = disabled
10 minutes = become dim if there is no motion in the display for 10 minutes
20 minutes = become dim if there is no motion in the display for 20 minutes
30 minutes = become dim if there is no motion in the display for 30 minutes
5.3.13 Capacity Bar
Off = disabled
On = enabled
PXP Series Balance