Formulation - OHAUS Pioneer PXP-Serie Bedienungsanleitung

PXP Series Balance
6. Remove the reference sample and place the test
object on the pan. The ratio of the test object to the
reference sample
percentage.
7. To view the reference sample weight or the test
object weight, press the Function / Mode button.
Item Settings
Note: If the previously established reference sample weight
needs to be kept, press No when the message "Clear
reference?" displays.
Printing Setup:
Changing printing setup. See Section 7 for more information.
4.4

Formulation

Note: Before using any application, be sure the balance has been leveled and calibrated.
Use this application for compounding and recipe making. The maximum number of components is 50.
Formulation
1. Press and hold the Function / Mode button until
Formulation appears.
2. After confirmation by pressing Yes, the message
"Place component 1" will appear on the screen.
3. Place the first ingredient on the pan (or in a tared
container) and press the Function / Mode button to
store the first weight.
weight is displayed as a
EN-11