Renishaw PH20 Installations- Und Benutzerhandbuch Seite 56

PH20 Installations- und Benutzerhandbuch
www.renishaw.de
Under certain circumstances the probe signal may falsely indicate a probe-seated condition. Do not rely on probe signals to stop machine
movement.
Probe trigger override will prevent machine backing off in the event of a probe collision.
The probe joint is designed to release the stylus module in the event of a crash.
The product has direct drive motors and the lowest risk reaction to an E-STOP is to perform a fast stop followed by holding position. As such,
the head motors will remain live, even if the E-STOP button is depressed
The PH20 head must be transported in Renishaw supplied packaging.
This equipment is not suitable for use in a potentially explosive atmosphere.
Veröffentlicht 09 2019
56