Suggested Spare Parts - Bosch WBE 4110 Bedienungsanleitung

€
Close the protecting carter and make the launch;
€
The machine shows the unbalance of the wheel that
it will memorize;
€
Close the protecting carter and make a second
launch;
€
You will see "0" "0" on the display;
€
Check the machine as the introduction says.
!
NOTE: To disable the function, turn off the balancing
machine.
9. Substitution of the board
NOTES FOR THE ASSISTANCE
When you need to substitute the board (code 654044),
remember to set up the correct configurations (chapter
5 and chapter 6) and complete the calibration proce-
dure (chapter 7).
1. Power supply
2. Encoder
3. Pick-up int
4. Pick-up ext
5. Calibers
6. F=400mAT
7. F1=500mAT
8. Buzer (Bip)
!
NOTE: The sensors (code 654432) are identical. In
order to distinguish them during the production,
they mount the red pick-up outside and the black
one inside (chapter 8.4.1).
Robert Bosch GmbH
Substitution of the board | WBE 4110 | 29
10.

Suggested spare parts

Code Description
654044 Panel+Board
653272 Optoelectronic
42136 Cable for the brake
41335 Belt
654432 Detector
632900 Brake shoe with lining
653095 Condenser
en
Quantity
1
1
2
1
2
2
1
|
1 695 654 756 2008-10-17