Bosch WBE 4110 Bedienungsanleitung Seite 19

2. Introduction
2.1 Digital balancing machine WBE 4110
The WBE 4110 balancing machines belong to the en-
try level in the range of products offered by BOSCH,
as they have a small size and a low price. Although
they are considered as entry level products, they have
many elaborated functions such as: dynamic and static
balancing programmes, aluminium, optimization, light
weight, PAX and self-placing of the adhesive weight
through the ALU-EASY gauge. You can also find the
configuration menu for the user, the calibration and the
auto-diagnosis menu.
Robert Bosch GmbH
Introduction | WBE 4110 | 19
3. How to use the machine
and surfing menu
2
4
9 10
Fig. 1: Control panel
1. Data display
2. Direction LEDs unbalance point
3. Unbalance point (LED)
4. Setting button (-/+ )of the DISTANCE of the circle
5. Setting buttons (-/+ )of the DIAMETER of the circle
6. Setting buttons (-/+ )of the WIDTH of the circle
7. SPLIT button
8. Button to select the unit of measurement for the width or the
diameter of the circle (MM/INCH)
9. Button for the control functions (SET)
10 Setting button for the balancing programme (MODE)
11. STOP button
11. START button
We can divide the balancing machine menu in several
submenus:
$
Configuration of the use
$
Configuration of the board
$
Self-calibration
$
Auto-diagnosis
Press the button "SET" and all the options will be
shown; to confirm, press the button "MM/INCH" by 1.5
second.
3.1 Configuration of the use
Press "SET" until the notice "TOL " is shown.
Left Display Right Display Description
TOL 5
RES 5
UNB GRA
SND ON
CAR ON
MOT OFF
1
6 11 12
It indicates the thresh-
old of the recalibration of
the balancing machine
Identification of the unbal-
ance, rounded off to 5g or real
Selection of the weight
(grams or once)
It indicates the acous-
tic sound (beep)
It indicates the possibili-
ty to use the wheel protect-
ing carter for the launch
It starts the motorcycle programme
|
1 695 654 756 2008-10-17
en
3
5
7
8