Herunterladen Inhalt Inhalt Diese Seite drucken

Klarstein 10031955 Bedienungsanleitung Seite 19

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Special Notes
• When positioning the unit, make sure that the power cord is not pinched or
damaged.
• Make sure that there are no multiple sockets or power supplies on the back of the
unit.
To avoid contamination of food, please follow the instructions below:
• A prolonged opening of the door can lead to a signifi cant rise in temperature in the
compartments of the appliance.
• Regularly clean surfaces that may come into contact with food.
WARNING
When using, servicing and disposing of the unit, pay attention to the left
symbol on the rear of the unit or on the compressor. This symbol warns
of possible fi res. There are fl ammable substances in the refrigerant lines
and in the compressor. Keep the appliance away from sources of fi re
during use, maintenance and disposal.
Important Safety Precautions of CO2
• CO2 gas can be dangerous 1 CO2 cylinders contain high-pressure compressed
gas, which can be hazardous if not handled properly. Make sure you read and
understand all the procedures for the CO2 cylinders before installation.
WARNING
Risk of injury! Always connect the CO2 cylinder to a regulator! Failure
to do so may cause an explosion resulting in possible death or injwy
when the cylinder valve is opened.
• Never connect the CO2 cylinder directly to the product container.
• Always follow the correct procedures when changing cylinders.
• Never drop or throw a CO2 cylinder.
• Always keep CO2 cylinders away from heat Store extra cylinder at a cool place.
Securely fasten with a chain in an upright position when storing.
• Always ventilate and leave the area immediately if CO2 leakage has occurred!
• There are two safety devices in the pressure system in the form of a valve. One
safety feature is on the CO2 bottle. The second is on the regulator.
• Never attempt to refi ll CO2 cylinder yourself CO2 tanks can be refi lled at locations
such as welding supply shops, party stores, fi re supply shops, or where kegs are
purchased.
EN
19

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

10031956Big spender

Inhaltsverzeichnis