Herunterladen Inhalt Inhalt Diese Seite drucken

Connector Panel; Light Switch - Sony HDC2500 Handbuch

Hd-farbkamera
Vorschau ausblenden Andere Handbücher für HDC2500:
Inhaltsverzeichnis

Werbung

ENG: Engineer line
b RET 1 (return video 1) button and select switch
Press the button to display the return video signal selected
with the switch on the viewfinder screen.
c RET 2 (return video 2) button and select switch
If you use an additional return video system in addition to
return video 1, press the button to display the return video
signal selected with the switch on the viewfinder screen.
Note
The RET 1 button has priority over the RET 2 button if both
buttons are pressed.
d LIGHT switch
Set to ON to illuminate the operation panel.

Connector panel

1
DC OUT
2
3
TRACKER
4
5
RET CTRL
FRONT MIC
6
LINE
MIC
+48V
OFF
AUDIO IN
DC IN 10.5-17V
CH1
7
a EARPHONE jack (stereo minijack)
For connecting an earphone or headset to hear the intercom
audio.
b DC OUT (DC power supply output) connector (4-pin)
To supply power to devices such as a wireless receiver
(optional) (max. 0.5 A).
c CRANE connector (12-pin)
For external interface, such as viewfinder.
d USB connector (for connecting a USB drive)
Connect a USB drive to save or load the settings data file.
For details, see "Using a USB drive" (page 55).
e TRACKER connector (10-pin)
For external interface, such as intercom and tally.
f RET CTRL (return control) connector (6-pin)
For connection to a CAC-6 Return Video Selector.
g DC IN (DC power supply input) connector (XLR 4-pin)
Used for connection to the AC-DN10 AC Adaptor to supply
power to the camera.
h INTERCOM1 and 2 (intercom 1 and 2) connectors (XLR
5-pin)
Used for input and output of intercom audio signals if an XLR
5-pin headset is connected.
The INTERCOM 1 connector can be used for communication
over the engineer line even when the power is off, as long as
the power LED is lit in red.
i REMOTE connector (8-pin)
For connection to an RCP-1000/1500-series Remote Control
Panel, or MSU-1000/1500 Master Setup Unit.
Note
When the camera is connected to a CCU, do not connect any
remote control device, such as RCP and MSU, to this
connector.
8
EARPHONE
REMOTE
9
CRANE
PROMPTER
0
/GEN
LOCK
AES/EBU
LINE
MIC
+48V
TEST
OFF
OUT
qa
CH2
SDI
MONI
qs
qd
Locations and Functions of Parts
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis